How Much Does a Spiral Staircase Cost?
$1,000 - $20,000
$1,000 - $20,000
Cost data is based on research by HomeAdvisor.
Updated September 26, 2022Written by HomeAdvisor.
A spiral staircase costs between $1,000 to $20,000, with an average price of around $10,400. The project total depends on the material type plus the height and width of the stairs. The installer's labor rate impacts the price, too.
|Average Cost||High Cost||Low Cost|
How much is a spiral staircase? Ranging from $1,000 to $20,000, the price of spiral stairways can vary quite a bit. The price largely depends on the material type. A metal spiral staircase costs much less than wood, glass, and Trex installations. The height and width of the staircase matter as well, as do labor rates.
|Spiral Staircase Material||Average Price Range|
|Steel||$1,000 - $4,400|
|Wrought or Cast Iron||$1,000 - $4,600|
|Wood||$2,000 - $20,000|
|Aluminum||$2,500 - $20,000|
|Glass||$2,500 - $20,000|
|Trex||$4,000 - $8,000|
When using steel materials, the cost to build stairs is about $1,000 to $4,400. Steel spiral staircase prices are considered one of the more affordable options and are often sold as full kits in various styles. Some even have wood treads that beautifully contrast the metal materials.
Wrought iron is a popular spiral staircase material due to its upscale reputation and durability. If you choose wrought-iron materials, expect this project to cost approximately $1,000 to $4,600. The kit includes the wrought-iron railing price as well as the balusters, treads, and supports. As with the metal kits, you can choose to have wood treads installed.
Similar in price to wrought iron, cast-iron spiral stairs run anywhere from $1,000 to 4,600. The material is well-loved by many homeowners due to its stylish Victorian look. The complexity of the design determines the final price. This material works best inside since it can rust outdoors.
For wood spiral stairs, expect to pay around $2,000 to $20,000. Since traditional hardwood stairs cost up to $30,000, this design could save you money. At the low end of the range are stairs made from oak, pine, and other basic wood varieties. High-end wood—such as walnut and mahogany—can drive up the final price considerably. You can either buy a kit or have a stair company design and install a custom build.
For aluminum spiral stairs, expect to pay between $2,500 and $20,000. Also available as a kit, these stairways are weather-resistant, making them an excellent choice for outdoor installs, but they work well indoors. Homeowners living near the ocean may find this type of spiral staircase to last longer than others.
A glass spiral staircase sits at the higher end of the cost spectrum, with a price tag of about $2,500 to $20,000. Wood or metal materials for the railings, balusters, and supports are often incorporated into the design. When sold as a kit, it includes the price of cable railings.
When built using Trex, your stairs will cost $4,000 to $8,000 on average. This composite material is often used to replace wood stairs and railings. For that reason, it works great outdoors and looks good inside, too. It’s also easy to clean with just soap and water, whether indoors or outdoors.
There are a variety of cost factors that impact the overall price of a spiral staircase. For example, the size, location, adornments, and the pro you hire to do the work will all impact the price. Make sure to incorporate these variables when planning your budget for the project.
Whether used indoors or outdoors, spiral stairs cost around $1,000 to $20,000, depending on the size and materials. However, not all materials work equally well for indoor and outdoor spiral staircase installs.
The best outdoor materials include:
As they aren’t weather-resistant, steel and cast iron are often used indoors. Glass works best indoors as well since it can be easily damaged.
The cost of labor to install a spiral staircase runs from $35 to $85 per hour. Basic kits take less than a day to install, while custom designs can take as much as two weeks. The total price for the project includes installation by a pro.
The price range to install a spiral staircase covers stairways up to 8 1/2 feet tall and 3 1/2 feet wide. For each extra step beyond that height, addaround $150 for low-end materials and $300 for high-end ones. As the width increases, add up to $100 per foot.
Costs vary by location, mostly depending on the demo work needed to make space. The cost of cutting out drywall, reinforcing floorboards, and similar tasks can greatly drive up the final price. Otherwise, it’s usually just a matter of assembling the kit as instructed unless it’s a custom build.
The actual steps on a staircase are called treads. Often, treads are made of the same material as the rest of the staircase, but not always.
Sometimes, homeowners will opt for a spiral staircase made of metal (steel, aluminum, wrought iron, etc.) and then select wooden treads for the stairs, for example. The types of treads most commonly used on spiral staircases include wood, steel, tile, glass, stone, and composite.
Handrails cost about $900 on average. Like the treads, handrails can be made of the same material as the rest of the staircase, or you can choose a different but complementary material.
Wood and metal are some of the most common handrail options for spiral staircases, but some homeowners choose to use PVC, especially with outdoor stairs.
Balusters are the spindles that support the handrail on a staircase. Balusters cost about $1,200 to $1,600 or $3 to $17 each before installation. Not only do they look aesthetically pleasing, but they also support the structure and make the staircase safer to use.
Many balusters are adorned with special designs and finishes and are often made of wood, wrought iron, or other metal.
Although spiral staircase kits are available, their installation is often quite complex. For that reason, it’s best left to a professional stair installer near you rather than trying to complete it as a DIY project.
The extra cost of hiring an expert provides true peace of mind. You can rest assured that your stairway is safe and secure and adds value to the home.
If you decide to give a spiral staircase kit a try on your own, you can expect to pay anywhere from $800 for basic models to about $15,000 for more intricate designs and materials. For example, you can get a basic steel spiral staircase kit on the low end and a more complex glass or aluminum spiral staircase on the higher end.
|Spiral Staircase Kit Material||Average Price Range|
|Steel||$800 - $3,600|
|Wrought iron||$800 - $,3600|
|Cast iron||$800 – $3,600|
|Wood||$1,800 - $6,000|
|Aluminum||$2,000 - $15,000|
|Glass||$2,000 - $15,000|
|Trex||$3,500 - $6,000|
Expect to pay anywhere from $8,000 to $100,000 for a curved stairway. As it’s often built as a custom piece, the extra funds go into creating the design. A curved staircase needs much more room and support materials than spiral staircase builds. They also don’t make a full 360-degree circle like a spiral staircase.
Spiral stairways need a certain amount of walking room to function correctly. The path varies with the width of the stairs. See the list below for an idea of the staircase width you’ll need based on the walking path size.
3 1/2 ft. (staircase width): 17 in. (path size)
4 1/2 ft. (staircase width): 23 in. (path size)
5 1/2 ft. (staircase width): 29 in. (path size)
6 1/2 ft. (staircase width): 35 in. (path size)
The opening at the top of a spiral stairway needs to be 44 by 44 inches wide at the minimum. This size opening will only fit a 3 1/2-foot-wide stairway. The smallest models are generally 3 1/2 feet wide and 8 1/2 feet tall. The height is dependent on the vertical distance from one floor to the next.
Spiral stairs often save space since they only need a small footprint for their installation. Unlike traditional models, these stairs only take up floor space equal to its overall width. However, because spiral stairs take up less square footage, they’re steeper than traditional stairs, which can be a problem for small children, pets, and people with mobility issues.
The spiral staircase design isn’t any more dangerous than other types of stairs, especially when installed by an expert stair and railing contractor near you who knows how to build it correctly. However, keep in mind that spiral staircases can be difficult for those with mobility issues due to their steep incline and often narrow width.
Whether wood or metal is better for a spiral staircase is a personal preference. Both wood and metal are popular materials for spiral stairways, but wood is the top choice for custom builds. Metal is a bit less expensive since it’s easier to form and comes in a variety of prefab kits. Unless made from aluminum or wrought iron, metal staircases are typically placed indoors.