How Much Does Sink Reglazing or Refinishing Cost?
$250 - $1,000
$250 - $1,000
Cost data is based on research by HomeAdvisor.
Published December 13, 2021Written by HomeAdvisor.
Reglazing or refinishing a sink usually costs around $690, with a typical range of $400 to $700. Depending on the sink type and how damaged it is, you may pay as low as $250 or as high as $1,000 to reglaze or refinish a sink.
Technically speaking, sink refinishing refers to a restoration process including sanding and repairing a sink. Sink reglazing is the last step in the refinishing process, when you apply a glaze to the sink. However, these terms can be used interchangeably to refer to the entire process.
The price range of $250 to $1,000 depends on the materials needed to reglaze or refinish sinks. Some are prep work tools and materials, such as plastic sheets and painter's tape, while others are the actual glaze and paint prices.
|Plastic sheeting||$3 – $10|
|Masking tape/painter’s tape||$6 – $10|
|Palm sander||$20 – $100|
|Epoxy paint||$15 – $25|
|Acrylic topcoat||$10 – $30|
|Sink reglazing kit||$20 – $50|
Labor for sink reglazing or refinishing usually costs $190 to $450 per project, averaging $290. Professional sink reglazers base their fees on the condition of the sink, sink type, and the job size. Labor costs include:
Protecting the area surrounding the sink
Removing the trim and hardware
Sanding and priming
Applying two coats of the finish
Replacing the hardware and trim
Professional sink reglazers will generally charge an hourly rate of $45 to $200 or a project rate of $190 to $450 based on the condition of the sink. For an average-size sink, the typical reglazing labor time is 6 hours.
The cost to refinish a sink can vary depending on the type. For example, a custom-made copper sink may cost more to reglaze than a porcelain bathroom sink because copper is a more delicate material.
It costs $230 to $450 to reglaze a porcelain sink. For a drop-in sink, which has a visible lip and drops in through a hole in the countertop, you can expect to pay $230 to $330. A pedestal bathroom sink, a freestanding sink with an upper basin and lower shaft, runs at a higher cost of $350 to $450.
Cast-iron sinks cost $350 to $500 to reglaze and are a popular option for kitchens because they last for a long time, retain heat well, and have a nice-looking finish. It’s a fraction of the cost of a new cast-iron sink, which typically runs anywhere from $1,200 to $5,000.
Stainless steel sinks usually cost $300 to $450 to refinish and are another popular kitchen option because they’re durable, low-maintenance, and have a lower cost. The cost includes polishing out scratches and recoating the steel with a protective acrylic, polyurethane, or urethane clear coat.
Granite sinks usually cost $210 to $520 to refinish, depending on the amount of repair work needed. If there are a lot of cracks in the sink that require mending, the job may fall at the higher end of the cost scale.
When it comes to sink reglazing, the sink material and size are more significant cost factors than the style. However, the larger the style of the sink, the larger the cost since the surface area is bigger.
The cost to refinish an average-size bathroom drop-in sink is $230 to $330. Costs may vary based on the sink material.
Since bathroom pedestal sinks are larger, refinishing runs around $350 to $450 or more. The sink base needs to be accounted for in the pricing and adds to the surface area, driving up the price.
The cost to refinish a drop-in kitchen sink runs from $230 to $520. The sink size and material will play a role in how much the refinishing ultimately costs.
Refinishing a custom kitchen sink with specific measurements, materials, and drain locations has a cost range of $350 to upwards of $500. Again, the cost depends greatly on the size and materials.
The larger and more complex a sink design, the more the reglazing job will cost because there’s more surface area to cover.
Kitchen sinks smaller than 30 inches usually cost $250 to $300 to refinish. Since smaller kitchen sinks are typically single-bowl sinks, there's less surface area to cover than a double-bowl or triple-bowl model.
Kitchen sinks 30 to 36 inches cost around $300 to $400 for refinishing. Sinks in this size bracket are usually either single- or double-bowl, and the cost also depends on the sink material.
Larger sinks like farmhouse-style ones that are more than 36 inches cost anywhere from $300 to upwards of $500, depending on the exact size and material. These sinks are oversized and usually deeper than sinks up to 36 inches, so there's more surface area to cover.
Round bathroom sink bowls are usually 16 to 20 inches and cost $220 to $300 to refinish. Any pricing variation depends on the exact sizing and sink material.
Bathroom sinks that are 19 to 24 inches are usually rectangular and cost anywhere from $250 to $350 for refinishing. The cost depends on the exact width, the depth of the sink, and the sink material.
Overall, the cost of reglazing or refinishing a sink is less than the cost to replace a sink. Here are some cost factors that can determine how much a sink reglazing project will cost.
The more chips and cracks your sink has, the more you can expect to pay for a reglazing or finishing project. Also, it’ll require more sanding and cleaning before reglazing if the sink has a lot of embedded dirt from years of use, which will drive up the cost.
Since kitchen sinks are usually larger than bathroom sinks, they’re more expensive to refinish. The average size of a kitchen sink is 30 to 33 inches, though a standard-size kitchen sink is considered anything between 24 to 36 inches. Kitchen sinks have a minimum depth of 7 inches, with the standard depth being 7.25 inches.
On the other hand, bathroom sinks average 16 to 20 inches. Standard rectangular bathroom sinks have a width of 19 to 24 inches, a front-to-back measurement of 16 to 23 inches, and a depth of 5 to 8 inches. Round bathroom sinks are usually 16 to 20 inches wide, with a depth of 5 to 8 inches.
DIY jobs usually cost around $85 to $90. Depending on the sink, you may be able to DIY the reglazing project. Acrylic, porcelain, and steel sinks are good DIY options because they’re very durable materials. DIY-ing saves money because there are no labor costs and you don’t need to spend time finding a contractor or waiting for an opening in their schedule to get the job done.
The average price to hire a professional to refinish or reglaze your sink is $690. Hiring a professional sink reglazing company near you may be your best bet if your sink is badly chipped or has a lot of staining and damage. Copper, granite, and stone sinks are best left to pros because they're easier to damage. If your sink is on the expensive side or you live in a historic home, bring in a professional so you don't damage your fixtures and end up having to pay for a whole new sink.
Reglazing can make your sink look like new without the price tag of a brand-new sink. Since refinishing or reglazing usually costs under $1,000 and takes only a few hours, it's a good investment and well worth the time. It's also a less arduous process than installing a new sink, with a refinishing job taking 3 to 8 hours to complete.
Reglazing or refinishing a sink doesn't just make it look better; it preserves the life of the sink. For older homes or homes with historic value, it's a great way to keep the look of the house and extend the lifespan of the original fixtures.
Refinishing a sink can make it last 15 to 20 years longer because it helps protect the integrity of the fixture.